check quantity

2DX-FAS Autosampler w/FAST Flame 1 Sys

PerkinElmer's FAST Flame 1 sample automation accessory is ideal for laboratories doing single-element or sequential multi-element determinations using flame atomic absorption (AA) for many samples daily and requiring consistently lower detection limits. It provides high-speed sample analysis without user intervention, delivering improved productivity.

Part Number N2020062
Buy Now

Please enter valid quantity

Please log in to add favorites.


Item(s) added to cart.

Detail Information

This configuration of the FAST Flame 1 accessory is a combination of 2DX-FAS high-speed autosampler, one precision peristaltic pump and a switching valve. It provides quick sample turnaround with:

  • Fast rinse-out
  • Short signal stabilization times
  • No sample-to-sample memory effect

The FAST Flame 1 accessory rapidly fills a sample loop via vacuum and then switches to inject the sample loop while the autosampler moves to the next sample. This removes the wait time associated with self-aspiration or peristaltic pumping and the long rinse-in and rinse-out times associated with autosampler movement and flushing resulting in sample-to-sample times as short as 15 seconds. Rapid injection and rinse-out result in a throughput of over 560 samples per hour—up to 40% higher than manual analysis for single-element determinations by Flame AA.

FAST Flame 1 provides the ability to:

  • Mechanically pump the sample during injection
  • Optimize nebulizer and flame conditions
  • Eliminate variability due to changes in sample viscosity, dissolved solids and tubing length
  • Provide long-term sample flow stability

Linear standard curves and excellent recovery of standard solution concentrations, obtained using FAST Flame 1, demonstrate the system's precision and accuracy, as well as long-term stability.

The 2DX-FAS is a compact autosampler with dual flowing rinse stations that hold 2 large racks or 4 micro racks. This kit includes one 9-position standards rack for 125ml bottles, two 60-position large sample racks for 15 ml tubes and two 21-position large sample racks for 50 ml tubes.

Note: The dimensions below refer to the 2DX-FAS Autosampler


Depth 29.5 cm
Height 47.7 cm
Product Brand Name FAST Flame
Weight 8.2 kg
Width 54.2 cm