Sample Holder Supplies

Kit consists of six mirrors on magnetized bases that can be easily placed on the base plate of the General Purpose Optical Bench. Included are two square flat mirrors with magnesium fluoride overcoat, two concave and two convex mirrors

Quick View

Combusto-Cone, Flexible, Pack of 1,000

5065914

For supporting liquid samples in combustion baskets. Used in a System 387 sample oxidizer for liquid scintillation counting.

List Price : 434.00 USD

Quick View

LAMBDA 100mm PbS Integrating Sphere

L6020372

Comprising Integrating sphere contained in a module which simply snaps into the spectrometer and is ready to be used without any adjustment. integrating spheres is the industry standard for the measurement of total reflectance, diffuse reflectance and diffuse transmittance measurements for a huge range of sample types. The 60 mm and 100 mm Integrating Sphere are used for routine diffuse reflectance and diffuse transmittance measurements.

Quick View

Variable Pathlength Cell Holder, Single Cell for LAMBDA 465

N4104003

An easy to install accessory for rectangular cells of varying pathlength. The partition plate allows cells to be supported throughout analysis, and it accommodates 5, 10, 20, 40, 50, and 100 mm pathlength cells.

List Price : 1079.00 USD

Quick View

Magnetic Stirrer Assy, Automatic, 2 Ch for LAMBDA 365

N4101016

Contains magnetic stirring controller, stirring head, and magnetic stirring bar for 10 mm pathlength cuvette. It is used with single cell holders to add stirring capability. There are up to 2 cells stirring, with an extra wide speed range of 100 to 1600 rpm. The control unit comes with 20 watts rated stirring power. A graphic display allows all settings to be readable at a glance. The operating temperature range is 0 to 40°C.

List Price : 2396.00 USD

Quick View

Advanced Transmission Holder for LAMBDA 365

N4101001

The advanced transmission holder is designed to hold materials such as glass, polymers, and films, providing a positive locating point for the sample that can be adjusted to accommodate a range of sizes and thicknesses.

List Price : 1056.00 USD

Quick View

Large sample compartment integrating sphere, 150 mm

PELA1002

Features a large optical compartment which allows for the transmittance measurements of samples up to 30.5 cm (1foot). High Performance integrating sphere, 150 mm diameter, 8 degrees sample and reference reflectance ports, 0 degrees transmittance ports with optional cell holder. Removable light traps at 8 degrees. Wavelength range: 200 to 2500 nm.

Quick View

Micro Cell Holder, 10mm Cuvettes for LAMBDA 365

N4101028

Designed for accurate positioning of small volume cuvettes. Accommodates any standard 10 mm cells and Nano Sticks.

List Price : 744.00 USD

Quick View

Universal Reflectance Accessory (URA) – UV/NIR

L6020358

Accessory enabling high-sensitivity, absolute reflectance measurements at multiple angles in the UV/NIR region of the spectrum. Fully-automated, multi-angle, absolute specular reflectance accessory.

Quick View

100 mm Powder Cell Sample Holder

L6022025

Comprising Integrating sphere contained in a module which simply snaps into the spectrometer and is ready to be used without any adjustment. integrating spheres is the industry standard for the measurement of total reflectance, diffuse reflectance and diffuse transmittance measurements for a huge range of sample types. The 60 mm and 100 mm Integrating Sphere are used for routine diffuse reflectance and diffuse transmittance measurements.

Quick View

Magnetic Film Holder for LAMBDA 465

N4104007

Accommodates any standard 10 mm cells, and optionally mounts film samples with rubberized magnetic plates.

List Price : 330.00 USD

Quick View

Base Plate for Variable Angle Reflectance Accessory for LAMBDA 365

N4101025

Used for installing Variable Angle Reflectance Accessory (7-75°) B0137314.

List Price : 720.00 USD

Quick View

Fiber optic reference feed kit

PELA1009

The kit allows the reference beam to be introduced into the sphere via a flexible fiber optic bundle. This eliminates the need to use mirrors to direct the reference beam into the sphere allowing a wider variety of geometry’s to be used.

Quick View

Nano Stick‐D, Z 15 Blue 2 μL 0.5 mm

N4101021

Each Nano Stick standard package kit (with case) comes with 1 Nano Stick, 1 loading plate, 1 bubble checker, and a user guide. The preferred color of your choice can be selected (Black, Blue, Red, Gold, or Silver). The Z-Dimension, the height of the center of the light beam, is 15 mm. The beam pathlength is 0.5 mm. Fits standard 10 mm cell holder. D Nano Sticks have dual sampling ports and S have a single sampling port.

List Price : 1847.00 USD

Quick View

Nano Stick‐D, Z 15 Silver 2 μL 0.5 mm

N4101024

Each Nano Stick standard package kit (with case) comes with 1 Nano Stick, 1 loading plate, 1 bubble checker, and a user guide. The preferred color of your choice can be selected (Black, Blue, Red, Gold, or Silver). The Z-Dimension, the height of the center of the light beam, is 15 mm. The beam pathlength is 0.5 mm. Fits standard 10 mm cell holder. D Nano Sticks have dual sampling ports and S have a single sampling port.

List Price : 1847.00 USD

Quick View

Water Jacketed Single Cell Holder for LAMBDA 365

N4101007

Maintains temperature control over standard 10 mm cells using recirculating liquid.

List Price : 984.00 USD

Quick View

Pair of Monofibers VIS/NIR (400nm to 2400nm), 2 x 2 meters each for PerkinElmer Lambda 800/900 Spectrometer, Pkg 2

B0509591

Vis/NIR (400 to 2400nm) 2 x 2m each.

List Price : 2513.00 USD

Quick View

Advanced Transmission Holder, Fixed Angle for LAMBDA 465

N4104005

The advanced transmission holder is designed to hold materials such as glass, polymers, and films, providing a positive locating point for the sample that can be adjusted to accommodate a range of sizes and thicknesses. The spring-loaded clamp securely holds objects up to 7 cm thick. The magnetic plate precisely positions films and thin samples.

List Price : 1081.00 USD

Quick View

Downward viewing integrating sphere, 150 mm

PELA1001

Sample measurement in horizontal position of powders, granular materials and large irregular geological samples. High Performance integrating sphere, 150 mm diameter, 8 degrees sample and reference reflectance ports, 0 degrees transmittance ports with optional cell holder. Removable light traps at 8 degrees. Wavelength range: 200 to 2500 nm.

Quick View

Nano Stick‐S, Z 15 Blue 2 μL 0.5 mm

N4101032

Each Nano Stick standard package kit (with case) comes with 1 Nano Stick, 1 loading plate, 1 bubble checker, and a user guide. The preferred color of your choice can be selected (Black, Blue, Red, Gold, or Silver). The Z-Dimension, the height of the center of the light beam, is 15 mm. The beam pathlength is 0.5 mm. Fits standard 10 mm cell holder. D Nano Sticks have dual sampling ports and S have a single sampling port.

List Price : 1458.00 USD

Quick View

ICRA Liquids Reflector, Pkg 100

L1180503

List Price : 789.00 USD

Quick View

"Grazing Angle" Relative Reflectance Accessory

PELA1026

For reflectance of thickness measurements 80° of light incidence.

Quick View

Nano Stick‐D, Z 15 Black 2 μL 0.5 mm

N4101020

Each Nano Stick standard package kit (with case) comes with 1 Nano Stick, 1 loading plate, 1 bubble checker, and a user guide. The preferred color of your choice can be selected (Black, Blue, Red, Gold, or Silver). The Z-Dimension, the height of the center of the light beam, is 15 mm. The beam pathlength is 0.5 mm. Fits standard 10 mm cell holder. D Nano Sticks have dual sampling ports and S have a single sampling port.

List Price : 1847.00 USD

Quick View

Lens assembly kit

PELA1007

The kit allows for the focusing of the beam to a small spot by means of a number of plane convex lenses and iris diaphragms. The lenses are mounted on magnetized bases.

Quick View

Petri Dish Base for Liquids Sampler, Pkg 100

L1180502

List Price : 424.00 USD

Quick View

InGaAs Downward viewing integrating sphere, 150 mm

L6020370

Sample measurement in horizontal position of powders, granular materials and large irregular geological samples. High Performance integrating sphere, 150 mm diameter, 8 degrees sample and reference reflectance ports, 0 degrees transmittance ports with optional cell holder. Removable light traps at 8 degrees. Wavelength range: 200 to 2500 nm.

Quick View

Variable Angle Transmission Holder for LAMBDA 465

N4104006

For transmittance measurements of various samples of film, glass, and plate, etc. at various angles. It adjusts the angle of solid samples for transmission measurements (0~360°). Also accommodates various thickness samples and large samples. This accessory allows reproducible measurement at multiple angles without moving the mounted sample. The angle is easily set by rotating the sample mounting stage.

List Price : 1590.00 USD

Quick View

Variable Pathlength Cuvette Holder for LAMBDA 365

N4101005

An easy to install accessory for rectangular cells of varying pathlength. The partition plate allows cells to be supported throughout analysis. It accommodates 5, 10, 20, 40, 50, and 100 mm pathlength cells.

List Price : 1122.00 USD

Quick View

Nano Stick‐S, Z 15 Gold 2 μL 0.5 mm

N4101034

Each Nano Stick standard package kit (with case) comes with 1 Nano Stick, 1 loading plate, 1 bubble checker, and a user guide. The preferred color of your choice can be selected (Black, Blue, Red, Gold, or Silver). The Z-Dimension, the height of the center of the light beam, is 15 mm. The beam pathlength is 0.5 mm. Fits standard 10 mm cell holder. D Nano Sticks have dual sampling ports and S have a single sampling port.

List Price : 1458.00 USD

Quick View

LAMBDA 100mm InGaAs Integrating Sphere

L6020371

Comprising Integrating sphere contained in a module which simply snaps into the spectrometer and is ready to be used without any adjustment. integrating spheres is the industry standard for the measurement of total reflectance, diffuse reflectance and diffuse transmittance measurements for a huge range of sample types. The 60 mm and 100 mm Integrating Sphere are used for routine diffuse reflectance and diffuse transmittance measurements.

Quick View

Combusto-Pad, 500/PK

5067034

Absorbent, combustible pads used when combusting liquid samples for radiometric detection.

List Price : 67.00 USD

Quick View

DSA Interlock Adapter Plate Assembly

MZ300589

Adapter Plate required for creating the interlock before mounting the Direct Sample Analysis (DSA) Ion Source onto the AxION 2 TOF MS.

Quick View

Nano Stick‐S, Z 15 Red 2 μL 0.5 mm

N4101033

Each Nano Stick standard package kit (with case) comes with 1 Nano Stick, 1 loading plate, 1 bubble checker, and a user guide. The preferred color of your choice can be selected (Black, Blue, Red, Gold, or Silver). The Z-Dimension, the height of the center of the light beam, is 15 mm. The beam pathlength is 0.5 mm. Fits standard 10 mm cell holder. D Nano Sticks have dual sampling ports and S have a single sampling port.

List Price : 1458.00 USD

Quick View

Test Tube Holder for LAMBDA 365

N4101018

Designed for test tubes, vials, ampules, cylinder type cuvette, etc.

List Price : 1542.00 USD

Quick View

DSA Sample Setup Fixture

MZ305437

Quick View

Cylindrical Long Path Cell Holder

C0550303

The Cylindrical Long-Path Cell Holder accommodates cells with outside diameters from 22 to 30 mm. A versatile cell holder, it accepts cells with pathlengths up to 100 mm.

List Price : 289.00 USD

Quick View

Fixed Angle Reflectance Holder for LAMBDA 365

N4101003

Designed for measuring specular reflectance spectra at a fixed angle (incident angle: 30° fixed). An easy-to-use specular reflectance accessory for analysis of solid samples, providing high-quality data for identifying films and coatings, measurement of the film thickness, and surface studies of metals.

List Price : 2340.00 USD

Quick View

Water Jacketed 8-Position Multi-Cell Holder for LAMBDA 365

N4101006

Accommodates any standard 10 mm cells. It uses recirculating liquid to control the temperature of up to 8 samples.

List Price : 3831.00 USD

Quick View

Nano Stick‐S, Z 15 Black 2 μL 0.5 mm

N4101031

Each Nano Stick standard package kit (with case) comes with 1 Nano Stick, 1 loading plate, 1 bubble checker, and a user guide. The preferred color of your choice can be selected (Black, Blue, Red, Gold, or Silver). The Z-Dimension, the height of the center of the light beam, is 15 mm. The beam pathlength is 0.5 mm. Fits standard 10 mm cell holder. D Nano Sticks have dual sampling ports and S have a single sampling port.

List Price : 1458.00 USD

Quick View

Transmission Port Small Spot Kit

L6022023

Comprising Integrating sphere contained in a module which simply snaps into the spectrometer and is ready to be used without any adjustment. integrating spheres is the industry standard for the measurement of total reflectance, diffuse reflectance and diffuse transmittance measurements for a huge range of sample types. The 60 mm and 100 mm Integrating Sphere are used for routine diffuse reflectance and diffuse transmittance measurements.

Quick View

Variable Angle Transmission Holder, 0-75° for LAMBDA 365

N4101002

Used for transmittance measurement of various samples of film, glass, plate, etc. at various angles. It adjusts the angle of solid samples for transmission measurements (0~80°). It also accommodates various thickness samples and large samples. This accessory allows reproducible measurement at multiple angles without moving the mounted sample. The angle is easily set by rotating the sample mounting stage.

List Price : 1590.00 USD

Quick View

Cuvette Cell Holder

L6022022

Comprising Integrating sphere contained in a module which simply snaps into the spectrometer and is ready to be used without any adjustment. integrating spheres is the industry standard for the measurement of total reflectance, diffuse reflectance and diffuse transmittance measurements for a huge range of sample types. The 60 mm and 100 mm Integrating Sphere are used for routine diffuse reflectance and diffuse transmittance measurements.

Quick View

Reflectance Port Small Spot Kit

L6022024

Comprising Integrating sphere contained in a module which simply snaps into the spectrometer and is ready to be used without any adjustment. integrating spheres is the industry standard for the measurement of total reflectance, diffuse reflectance and diffuse transmittance measurements for a huge range of sample types. The 60 mm and 100 mm Integrating Sphere are used for routine diffuse reflectance and diffuse transmittance measurements.

Quick View

Relative Specular Reflectance Accessory 45 Degrees

PELA1025

For reflectance measurements 45° of light incidence.

Quick View

Nano Stick‐S, Z 15 Silver 2 μL 0.5 mm

N4101035

Each Nano Stick standard package kit (with case) comes with 1 Nano Stick, 1 loading plate, 1 bubble checker, and a user guide. The preferred color of your choice can be selected (Black, Blue, Red, Gold, or Silver). The Z-Dimension, the height of the center of the light beam, is 15 mm. The beam pathlength is 0.5 mm. Fits standard 10 mm cell holder. D Nano Sticks have dual sampling ports and S have a single sampling port.

List Price : 1458.00 USD

Sample Holder Supplies

Product Type

Model Compatible With

Pipetting Arms

Product Group

Technology Type