Nebulizers

Part of burner head O-ring kit 09902219. Qty. 1

PFA-ST self-aspirating nebulizer for prepFAST, with external 1/4-28 threaded connector.

This Single Cell sample introduction kit, software included, is for NexION^® 2000 and 1000 ICP-MS series instruments.

Sample fitting for standard Meinhard nebulizer 0.5mm x 70cm capillary.

PFA-100 Microflow Nebulizer, 100 µL/min, with integrated autosampler probe [Ultem support] for ESI SC Autosampler. HF Resistant. Capillary length 150cm. Probe length 175 mm.

This quartz 1.0 mL/min SeaSpray nebulizer is used with ELAN^® 5000, 6x00, 9000, and DRCs ICP-MS, NexION^® 1000, 2000, 300, and 350 ICP-MS, and Optima^™ 3x00 RL ICP-OES series instruments.

Peripump Union - Male Barb CTFE Fitting for the NexION^® 2000 and 1000 ICP-MS MEINHARD^® Plus Nebulizer (10-32 male threads). Quantity: 1

Cyclonic spray chamber drain fitting with ETFE capillary tubing - 24" length by 0.030" ID x 0.062" OD.

This PFA 400 µL/min MicroFlow nebulizer, with integrated fluoropolymer capillaries, is used with NexION^® 2000 and 1000 ICP-MS series instruments.

The Slurry glass concentric nebulizer is ideal for specialized applications requiring the aspiration of slurries or suspensions. Its capillary bore is 50% larger than that of standard concentric nebulizers and this reduces the possibility of particle blockage while giving excellent signal stability.

PFA MicroFlow High Solids Large bore Teflon nebulizer for PE Elan.

CTFE Liquid fitting - male with barb end

50 µL/min self-aspirating sample capillary for ST nebulizer. 0. 20 mm i. d. , purple marker. For flow rates below 100 µL/min integrated capillary nebulizers, e. g. N8145102, may be optimal. ]

1/4" Swagelok Adapter for PE Optima 3000 series, PE Sciex ICP/MS

Metal body nebulizer with complete assembly.

PFA-20 Microflow Nebulizer, 20 µL/min, with integrated autosampler probe [Ultem support] for ESI SC Autosampler. HF Resistant. Capillary length 150cm. Probe length 175 mm.

0.5 meters of .044" OD X .018" ID Clear Polyethylene Tubing with attached BRC 3 fitting for sample lines. (10-pack)

F2 Standard Integrated Capillary (standard fitting with + nebulizers). F2 Standard integrated capillary for self-aspiration or pumping. Includes 0. 5 mm i.d. (orange marker) 70 cm long capillary.

Includes a clear sapphire sample tip and a red ruby argon tip optimized for ICP-MS. The tips are constructed of PEEK for maximum corrosion resistance. Used in all GemClean Cross-Flow II nebulizers produced after September, 1998.

Plastic body nebulizer with complete assembly.

NexION 1000/2000 SMARTintro sample introduction solutions are tested as a complete unit to ensure intra- and inter-laboratory performance. Each system utilizes specific combinations of sample introduction components and the kits are color-coded according to the application of the user.

The UniFit sample tube connector is used with U-Series nebulizers.

PFA-400 nebulizer with integrated capillary.

PFA-200 Microflow Nebulizer, 200 µL/min, with integrated autosampler probe [Ultem support] for ESI SC Autosampler. HF Resistant. Capillary length 150cm. Probe length 175 mm.

This Single Cell sample introduction kit, which includes an Asperon^™ spray chamber, MEINHARD^® HEN nebulizer, quartz injector, and Syngistix^™ Single Cell software, is used with NexION^® 350 ICP-MS series instruments.

The Tip Kit includes a clear sapphire sample tip and a red ruby argon tip. The tips are constructed of PEEK with the gem inserts noted for maximum corrosion resistance.

The ST3 MicroFlow PFA nebulizer with external 1/4-28 threaded connector is designed for superior clog resistance and higher sensitivity compared to the standard PFA nebulizer. The PFA-ST MicroFlow nebulizer is made from high purity, HF resistant PFA.

Heavy-duty construction prevents cracking or tipping. Conical design allows for use of entire sample. Translucent, low density, recommended for use with most aqueous and organic solutions.

NexION 1000/2000 SMARTintro sample introduction solutions are tested as a complete unit to ensure intra- and inter-laboratory performance. Each system utilizes specific combinations of sample introduction components and the kits are color-coded according to the application of the user.

Metal body nebulizer with complete assembly.

The UniFit connector is a convenient drain connector for glass cyclonic spray chambers.

This organics sample introduction kit includes core consumables and components used with Optima^™ 2x00 DV, 4x00 DV, 5x00 DV, and 7x00 DV ICP-OES series instruments.

Includes all O-Rings used in the Cross-Flow and Cross-Flow II nebulizers.

This hydrofluoric acid-resistant sample introduction kit, which includes a PFA barrel spray chamber, PFA nebulizer, quartz torch, and platinum injector, is used with NexION^® 300 and 350 ICP-MS series instruments.

The Nebulizer Line Assembly contains tubing and a connector for the ASXPRESS^® PLUS.

The UniFit sample tube connector is used with U-Series nebulizers.

PFA-50 MicroFlow nebulizer with integrated capillary. Self-aspirating PFA MicroFlow nebulizers are constructed entirely from chemically resistant fluoropolymers ideal for strong acids, alkalis, organics and high salt solutions. They are resistant to clogging and produce a fine aerosol for high transport efficiency and high sensitivity.

Replacement tubing for internal standard kit.

This organics spares kit includes various consumables and components used with Optima^™ 2x00 DV, 4x00 DV, 5x00 DV, and 7x00 DV ICP-OES series instruments.

This MEINHARD^® nebulizer gas line is used with Avio^™ 200 and 500 ICP-OES, and Optima^™ 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV and 8x00 ICP-OES series instruments.

Replacement tubing for internal standard kit.