Injectors

This injector adapter o-ring kit, for cyclonic and concentric configurations, is used with Avio^™ 200 and 500 ICP-OES series instruments.

PTFE-coated o-ring, 8.74 mm inner diameter by 1.78 mm width, used with Scott/Cross-Flow torch injectors in Avio^™ 200 and 500 ICP-OES series instruments.

1.5 mm Quartz injector. Attaches to ESI spray chamber.

Quartz injector, o-ring-free. Use with o-ring-free torch. Quartz injectors are used for volatile organic solvent introduction and recommended for a wide range of non-HF applications.

These Optima 8x00 series quartz injectors are used for volatile organic solvent introduction and recommended for a wide range of non-HF applications.

Please note: Compatible with ESI press-fit PFA spray chamber connection.

Includes four O-Rings for injector support/ torch base.

For volatile organic solvent analysis. Use with o-ring-free torch. Platinum cones recommended.

For use with the Corrosian-Resistant Torch and the Ryton Scott Spray Chamber. For cassette torch mounts (manufactured after April 2005).

A robust option ideal for a wide variety of applications. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene.

Provides lower sample flow rate as an alternative to the standard injector.

This organics sample introduction kit includes core consumables and components used with Optima^™ 2x00 DV, 4x00 DV, 5x00 DV, and 7x00 DV ICP-OES series instruments.

Alumina injectors are corrosion-resistant to all mineral acids, including HF and aqua regia. The injectors are also used with less volatile organic solvents, e.g., xylene.

Sapphire injectors are ideal for silicon and HF applications.

TheProgrammed Temperature Split/Splitless Injector Starter Kit includes the proper starter and/or replacement parts to keep your programmed temperature injector system operating at peak efficiency.

0.85-mm bore quartz injector with ball joint for reduced sample loading. For use with pass-through injector support WE02-3951 or W101-2406. Recommended for organics.

Quartz Injectors are designed for organic solvents and non-HF matrices.

This quick-change sample introduction module, with cyclonic spray chamber and MEINHARD^® concentric nebulizer technologies, includes core consumables and components for Optima^™ 2x00 DV, 4x00 DV, 5x00 DV, and 7x00 DV ICP-OES series instruments.

This injector adaptor cap is used with Avio^™ 200 and 500 ICP-OES series instruments.

This injector is the standard configuration and provides complete corrosion resistance to all acids, including HF. Also used with less volatile organic solvents, e.g., xylene.

Optima 4300 SLIDE INJECTOR LOCKING

This o-ring kit includes various Cyclonic/Concentric torch injector o-rings used with Avio^™ 200 and 500 ICP-OES series instruments.

A robust option ideal for a wide variety of applications. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene.

Use with standard torch

HF-resistant. Use with standard torch.

This sample introduction module, with cyclonic spray chamber and MEINHARD^® concentric nebulizer technologies, includes core components used with Avio^™ 200 ICP-OES series instruments.

Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e. g. , xylene.

This PTFE-coated Viton^® o-ring, with an inner diameter of 6.07 mm and width of 1.78 mm, is used for the internal injector support adapter with ELAN^® 6000, 9000, DRC II, and DRC-e, and NexION^® 300 and 350 ICP-MS series instruments.

The PerkinElmer Quartz Injectors, 1.2 mm i.d. for use with the Optima 8x00 ICP-OES. Quartz injectors are designed for organic solvents and non-HF matrices.

Quartz injector, o-ring-free. Use with o-ring-free torch. Quartz injectors are used for volatile organic solvent introduction and recommended for a wide range of non-HF applications.

Standard for aqueous solutions and less volatile organic solvents.

This part is a replacement part for the PSS Injector Starter Kit. The kit includes universal connectors (5), 0.53 mm ID deactivated fused-silica (5 m), 2 mm ID quartz liner, 1 mm ID quartz liner, glass hourglass liner, 1/16 in. stainless steel nuts (5), 0.5 mm ID graphite ferrules (10), 0.8 mm ID graphite ferrules (10), Viton® O-Rings (6), graphite O-Rings (5), untreated quartz wool, wafer scribes (10), and green septa (50). Maximum temp 250 °C. Recommended for use with mass spec. Shipped with instrument.

For use with the Corrosion-Resistant Torch and the Ryton Scott Spray Chamber. For twist type torch mounts (manufactured before April 2005).

For low-ppt Aldeterminations, Size: 2 mm. Platinum injectors are used for introducing volatile organic solvents and HF-containing semiconductor-grade chemicals.

This hydrofluoric acid-resistant quick-change sample introduction module, with cyclonic spray chamber and GemCone^™ concentric nebulizer technologies, includes core consumables and components used with Optima^™ 4300 V, 5300 V, and 7300 V ICP-OES series instruments.

Sapphire injector, bayonet mount. HF-resistant. Used for high matrix geochemistry and HF applications where low ppt Al is not required.

For Models Plasma 1000, Plasma 2000, Plasma II, Plasma 400, Plasma 40 ICP/6500(XR). Used for less volatile organic solvents when a higher sample flow rate is desired.

This SMARTintro^™ torch module, with a demountable 2.0 mm I.D. platinum injector and demountable SilQ torch, is used for NexION^® 1000 and 2000 ICP-MS series instruments.

These sapphire injectors are used for environmental, geochemistry, and HF applications on the Optima 4x00, 5x00 and 7x00 series instruments. Injector for PE Optima 2000/4000/5000, sapphire in PFA base, 1.8mm, (connects directly to ESI spray chambers)

This hydrofluoric acid-resistant sample introduction kit, which includes a PFA barrel spray chamber, PFA nebulizer, quartz torch, and platinum injector, is used with NexION^® 300 and 350 ICP-MS series instruments.

The Marathon Filament is a revolutionary technology developed exclusively by our GC/MS and GC/MS/MS systems, delivering long life even under the most difficult chromatography conditions. It is a direct replacement of the previous rhenium filament - no system changes required. The Marathon Filament is part of our ongoing efforts to deliver the latest technology for our GC platforms.