PerkinElmer

ICP-MS Consumables

OF

Each part is fit to perform and is manufactured with the highest quality materials available. Selection of the correct components can help speed your analyses, increase repeatability of results and minimize errors. Our precision designed products deliver the peace of mind that comes from knowing that you’ll get the results you need. Whether you are looking for sample introduction components or standards, we have the consumables you need to keep your ICP-MS up and running smoothly and efficiently. Choose from our variety of torches, nebulizers, spray chambers, injectors, cones, and autosampler supplies.

Cones

Our Cones are precision-designed and manufactured providing the best analytical results. We invest heavily in testing and validating our complete portfolio of products to ensure that you receive accurate, repeatable results, on-time, every time throughout the lifetime of your instrument. Large-orifice sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Choose from Nickel and Platinum Cones.

Humidifiers

Argon Humidifiers are commonly used in ICP analyses involving samples with high concentrations of dissolved solids. It helps to alleviate salt deposits in the nebulizer and torch injector, allowing uninterrupted and maintenance-free operation.

Injectors

We offer a complete selection of injectors in various sizes and materials to meet all of your application needs. Choose from Alumina, Sapphire and Quartz injectors. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. Quartz injectors are designed for organic solvents and non-HF matrices. Sapphire injectors are ideal for silicon applications.

Nebulizers

We offer a complete selection of nebulizers in a variety of materials for all of your application needs. Selection of the correct components can help speed your analyses, increase repeatability of results and minimize errors. Not every sample introduction system is ideal for every application. Each combination has a unique advantage based on your particular sample needs. Choose from Concentric, MicroFlow, and GemClean nebulizers.

Sample Introduction Kits

We offer a selection of Sample Introduction Kits, Sample Introduction Modules, and Consumables Kits for your specific application needs. Not every sample introduction system is ideal for every application. Each combination has a unique advantage based on your particular sample needs. Each kit is designed for your instrument model for your convenience.

Spray Chambers

The spray chamber is an integral part of the sample introduction System. Selection of the correct components can help speed your analyses, increase repeatability of results and minimize errors. Each type of spray chamber has been tested to provide the best performance and analytical results. Not every sample introduction system is ideal for every application. Each combination has a unique advantage based on your particular sample needs. With more sampling and application options than ever before, let us work with you to best understand your laboratory requirements and recommend the best option. Choose from Baffled Cyclonic, Scott Spray and PFA Spray Chambers.

Torches

We carefully select the best materials that provide optimal performance. The right consumables, methods and application support are as integral to the success of your laboratory as your instrumentation. That’s why we invest heavily in testing and validating our complete portfolio of solutions to ensure that you receive accurate, repeatable results, on-time, every time throughout the lifetime of your instrument. Torches are specifically designed for your instrument. Trust the consumables engineered for your instruments. Choose from Demountable Quartz, Fixed, and D-Torches.
Products & Services (282)
Filters:
Product Type
  • Accessories (29)
  • Consumables (253)
Product Brand Name
  • Asperon (1)
  • D-Torch (6)
  • DuraMist (4)
  • ESI (5)
  • GemCone (1)
  • GemTip (4)
  • MEINHARD (23)
  • MicroFlow (33)
  • MicroFlow-ST (9)
  • MicroMist (12)
  • OpalMist (1)
  • Peltier (7)
  • pergo (8)
  • SeaSpray (6)
  • Teledyne CETAC (1)
  • Tracey (1)
Material
  • Carbon Fiber (10)
  • Ceramic (2)
  • CTFE (6)
  • Glass (22)
  • Nickel (3)
  • PEEK (5)
  • PFA (46)
  • Platinum (4)
  • PTFE (9)
  • Quartz (44)
  • Ryton (1)
  • Sapphire (3)
  • SilQ (7)
  • Viton (4)
Inner Diameter
  • 0.25 mm (6)
  • 0.5 mm (7)
  • 0.85 mm (1)
  • 1.0 mm (2)
  • 1.2 mm (1)
  • 1.5 mm (5)
  • 1.6 mm (2)
  • 1.8 mm (2)
  • 2.0 mm (6)
  • 2.5 mm (2)
Model Compatible With
  • Avio (1)
  • Avio 200 (57)
  • Avio 500 (57)
  • ELAN (1)
  • ELAN 5000 (80)
  • ELAN 6x00 (76)
  • ELAN 9000 (91)
  • ELAN DRC II (83)
  • ELAN DRC-e (89)
  • ELAN DRCs (3)
  • NexION (3)
  • NexION 1000 (135)
  • NexION 2000 (138)
  • NexION 300 (128)
  • NexION 350 (133)
  • NexION 5000 (3)
  • Optima (1)
  • Optima 2x00 DV (14)
  • Optima 3000 DV (1)
  • Optima 3000 SCR (1)
  • Optima 3000 XL (1)
  • Optima 3x00 DV (6)
  • Optima 3x00 RL (6)
  • Optima 4300 V (1)
  • Optima 4x00 DV (58)
  • Optima 5x00 DV (58)
  • Optima 7300 V (1)
  • Optima 7x00 DV (58)
  • Optima 8x00 (58)
  • SC-FAST (2)
Product Group
  • Adapters (8)
  • Adapters and Replacement Parts (8)
  • Autosampler Supplies,Probes (1)
  • Capillary Assemblies and Tubing (34)
  • Cleaning Tools (5)
  • Cooling Systems (1)
  • Detectors & Kits (2)
  • Drain Lines (1)
  • End Caps (1)
  • Ferrules (1)
  • Gas Lines and Tees (3)
  • Injectors (13)
  • Internal Standard Kits and Tees (2)
  • Ion Lenses & Tools (2)
  • Nebulizer Tips (1)
  • Nebulizers (63)
  • O-Rings (8)
  • O-Rings & Gaskets (2)
  • Outer Tubes (2)
  • Probes (4)
  • Removal Tools (2)
  • Replacement Parts (6)
  • Safety Shields (2)
  • Sample Introduction Kits (11)
  • Sampler Cones (4)
  • Screws (1)
  • ShadowStops (1)
  • Skimmer Cones (3)
  • Spray Chambers (19)
  • Temperature Controlled Spray Chambers (7)
  • Torch Cassettes (8)
  • Torch Mounts (3)
  • Torch Replacement Parts (2)
  • Torch Tools (3)
  • Torches (15)
  • Tubing (2)
  • Valves and Adapters (6)
Style
  • 0-Slot (12)
Technology Type
  • AA (1)
  • ICP-MS (63)
  • ICP-OES (60)
Type
  • Baffled and Cyclonic (12)
  • Barrel (3)
  • Cyclonic (1)
  • Scott (2)
Detector Type
  • ICP-MS (1)

Sort by

1-25 of 282 Products & Services

  • Nickel Skimmer Cone for ELAN

    Nickel Skimmer Cone for ELAN 9000/6x00/DRCs

    This Nickel Skimmer Cone is for ELAN 9000/6x00/DRCs ICP-MS series instruments.

    List Price : 337.00 USD
  • MEINHARD Concentric Glass Nebulizer, Type K3

    This borosilicate glass K3 MEINHARD Nebulizer, with 3 mL/min uptake rate and 0.7 L/min Argon flow rate, is used with Avio® 200 and 500 ICP-OES, Optima® 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments, as well as ELAN® and NexION® 300/350 ICP-MS series instruments.

    List Price : 556.00 USD
  • N8151079 NexION Gas Connector

    1/8 Gas Fitting with Ratchet Nebulizer Connector

    This Gas Fitting with Ratchet Nebulizer Connector is for use with NexION® 1000/2000 ICP-MS series instruments. It is a Unifit style connector and is compatible with MicroMist and SeaSpray nebulizers.

    List Price : 146.00 USD
  • N0777410

    Demountable Quartz Injector for NexION 300/350

    This Quartz Injector Cassette Mount is designed for use with demountable torches in NexION® 300/350 ICP-MS series instruments. The demountable design allows the injector to be removed and replaced efficiently without dismounting the torch. Standard Injectors have an O-ring free direct connection to Cyclonic and PFA spray chambers while O-ring free Injectors have an O-ring free seal that reduces contamination, makes it easy to clean and easy to insert.
    Price Range : 569.00 USD - 723.00 USD
  • SC-FAST Internal Standard Addition Tee for ST Nebulizers, 0.25 mm I.D. - 1/4-28 Fitting

    This Internal Standard Addition Tee is for use with ST Nebulizers. It connects to port #3, 14 cm in length, and has 1/4-28 fittings.

    List Price : 780.00 USD
  • DuraMist

    DuraMist Nebulizer, 0.4 mL/min

    This DuraMist Concentric Nebulizer is used with NexION® 1000 and 2000 ICP-MS series instruments. The DuraMist nebulizer is an economical nebulizer for high precision analyses involving samples digested in HF and is recommended for samples containing up to 5% HF. For samples with higher concentrations of HF, the OpalMist PFA nebulizer is recommended.

    List Price : 1446.00 USD
  • F1 Detachable Capillary, 0.80 mm I.D. - Blue Marker

    This Detachable Capillary is designed for use with MEINHARD Nebulizers in PerkinElmer ICP-OES and ICP-MS instruments. The capillary measures 70 cm long and has a 0.80 mm inner diameter. It is defined with a blue marking.

    List Price : 74.00 USD
  • ES-1103-3180

    Demountable Sapphire Injector for NexION 300/350

    This Sapphire Injector Cassette Mount is designed for use with demountable torches in NexION® 300/350 ICP-MS series instruments. The demountable design allows the injector to be removed and replaced efficiently without dismounting the torch. Standard Injectors have an O-ring free direct connection to Cyclonic and PFA spray chambers while O-ring free Injectors have an O-ring free seal that reduces contamination, makes it easy to clean and easy to insert.
    Price Range : 1170.00 USD - 1513.00 USD
  • pergo 2 Argon high solids accessory w/o Nebulizer

    pergo 2 Humidifier with MEINHARD Plus Type C Nebulizer

    The pergo 2 Argon Humidifier is for use with ELAN® and NexION® ICP-MS series instruments. The pergo improves performance of all concentric nebulizers for the routine analysis of brines, fusion digests and other high-TDS samples. A high pressure membrane positioned inside a temperature-controlled water reservoir perfuses water vapor into the ICP nebulizer gas stream. By increasing humidity in the argon nebulizer gas, the pergo prevents salt deposits at the nebulizer tip, improving short and long-term signal stability. The pergo 2 is designed for analyses dealing with high concentrations of dissolved solids on instruments using auxiliary gas.
    List Price : 2704.00 USD
  • N8152587

    PFA-400 MicroFlow Nebulizer with Integrated Autosampler Probe - Carbon Fiber Support

    This PFA MicroFlow Nebulizer with Integrated Autosampler Probe is for NexION 1000 and 2000 ICP-MS series instruments. These nebulizers self-aspirate at low flow rates with any autosampler and provide the same benefits of the PFA MicroFlow nebulizer. MicroFlow nebulizers are resistant to clogging, reliably self-aspirated or pumped to produce a fine aerosol for high transport efficiency and high sensitivity. The integrated sampling probe is constructed by encapsulating a rigid support material between layers of PFA to provide a chemically-resistant probe that is mechanically stable and resilient.
    List Price : 2175.00 USD
  • C1000 64 purple kit NexION 2000

    SMARTintro Sample Introduction Kit - Purple

    NexION 1000/2000 SMARTintro sample introduction solutions are tested as a complete unit to ensure intra- and inter-laboratory performance. Each system utilizes specific combinations of sample introduction components and the kits are color-coded according to the application of the user.
    List Price : 5800.00 USD
  • Platinum Sampler Cone NexION

    Platinum Sampler Cone for NexION 300/350/1000/2000/5000

    This platinum sampler cone is used with NexION® 300, 350, 1000, 2000, and 5000 ICP-MS series instruments.
    List Price : 2506.00 USD
  • N8145461

    F0 FAST Valve Connecting Line, 0.5 mm ID (Orange), 14 cm

    FAST Valve Connecting Lines for MEINHARD Plus Nebulizers
    List Price : 152.00 USD
  • Fixed 1.5 mm I.D. Injector Quartz Torch for NexION

    One-Piece Quartz Torch, 1.5 mm I.D. Injector - Double Blue Mark

    This one-piece quartz torch, with 1.5 mm I.D. injector, is used for NexION® 1000 and 2000 ICP-MS series instruments.
    List Price : 656.00 USD
  • NexION 2000 Cassette Only (Platinum)

    Torch Cassette, Platinum - Cassette Only

    Platinum torch cassette for NexION® 2000 ICP-MS high purity/HF-resistant configuration.
    List Price : 836.00 USD
  • DuraMist Nebulizer, 1.0 mL/min

    This DuraMist Concentric Nebulizer is used with ELAN® 5000/6x00/9000/DRCs and NexION® 300/350 ICP-MS series instruments. The DuraMist nebulizer is an economical nebulizer for high precision analyses involving samples digested in HF and is recommended for samples containing up to 5% HF. For samples with higher concentrations of HF, the OpalMist PFA nebulizer is recommended.

    List Price : 1201.00 USD
  • 0.85 mm I.D. Quartz Ball Joint Injector for ELAN/NexION 300/350

    This Ball Joint Injector is for use with ELAN® and NexION® 300/350 ICP-MS series instruments. It is designed for use with Pass-Through Ball Joint Injector Support Adapters (WE023951 or W1012406). Quartz injectors are ideal for volatile organic solvent introduction and recommended for a wide range of non-HF applications.

    List Price : 499.00 USD
  • EzyFit Connector for SeaSpray and MicroMist Nebulizers - 0.25 mm I.D. x 1.59 mm O.D. x 700 mm Long Sample Tube, Qty. 10

    This EzyFit Connector is for use with MicroMist and SeaSpray nebulizers in Optima® 4x00/5x00/7x00/8x00 and Avio® 200/500 ICP-OES series instruments in addition to ELAN® 5000/6x00/9000/DRCs and NexION® 300/350/1000/2000 ICP-MS series instruments. This product serves as a replacement connector and sample tubing for glass concentric nebulizers with EzyFit sample inlet. It is 700 mm long and includes 10 connectors.

    List Price : 198.00 USD
  • PFA MicroFlow Nebulizer for NexION

    PFA MicroFlow Nebulizer with Integrated Capillary, 100 μL/min

    This PFA 100 µL/min MicroFlow nebulizer, with integrated fluoropolymer capillaries, is used with NexION® 2000 and 1000 ICP-MS series instruments.
    List Price : 2054.00 USD
  • Demountable Platinum Injector for NexION 300/350

    This Platinum Injector Cassette Mounties designed for use with demountable torches in NexION® 300/350 ICP-MS series instruments. The demountable design allows the injector to be removed and replaced efficiently without dismounting the torch. Standard Injectors have an O-ring free direct connection to Cyclonic and PFA spray chambers while O-ring free Injectors have an O-ring free seal that reduces contamination, makes it easy to clean and easy to insert.
    Price Range : 3245.00 USD - 3542.00 USD
  • 0.50 mm I.D. Autosampler Probe

    Autosampler Probe for ST Nebulizers, 0.5 mm I.D.

    Replacement probe for ESI autosamplers. All perfluoroalkyl (PFA) wetted sample flow path reduces contamination and provides chemical resistance.

    List Price : 465.00 USD
  • Hyper Skimmer Cone for NexION

    This hyper skimmer cone is used with the NexION® 300, 350, 1000, and 2000 ICP-MS series instruments.
    List Price : 201.00 USD
  • 10

    0.8 mm I.D. Addition Gas Line for NexION 2000

    Metal-free addition gas line, 25.4 cm in length with 0.8 mm inner diameter, used with NexION® 1000 and 2000 ICP-MS series instruments. It is designed for hydrofluoric acid and organics applications.

    List Price : 197.00 USD
  • SeaSpray-MicroMist-Conikal-Slurry Nebulizer

    MicroMist Nebulizer, 0.4 mL/min

    This glass MicroMist nebulizer includes connectors and sample tubing for use with ELAN® 5000/6x00/9000/DRCs and NexION® 300 and 350 ICP-MS series instruments. It can also be used with Optima® 3x00 RL ICP-OES series instruments. The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. MicroMists for ELAN/NexION 300/350 are fitted with a UniFit connector with 1.3 O.D. X 0.50 mm I.D. x 700 mm long sample tubing.

    List Price : 763.00 USD
  • SMARTintro™ Sample Introuction Module Black 2.0 mm Quartz Torch

    SMARTintro Sample Introduction Module, Black, with Demountable 2.0 mm I.D. Quartz Injector and Quartz Torch

    This SMARTintro torch module, with a 2.0 mm I.D. demountable quartz injector and demountable quartz torch, is used for NexION® 1000 and 2000 ICP-MS series instruments.
    List Price : 2196.00 USD
  • Jump to: