Fluorescence Consumables

The FEP Delivery Tubing is a flexible, heat-resistant, transparent tube with an inner diameter of 1 mm. It is used as an outlet tube for the Sipper Cell and Pump Accessory (L2250135).

The Festoon Lamp, 3 W is used along with the Xenon Source Lamp, 7.3 W to maintain even triggering and stability in our LS 30/40/45/50/50B/55 spectrometers. This lamp is also comapatible with the LC 240.

This optional accessory fits the Microplate Reader (N4201024). It controls the temperature of the microplates via circulating water. Achievable temperature range using this accessore with:

• a water bath: ambient to 100°C
• a Peltier Controller: -5 to 100°C

A thermostatting device, such as the Peltier controller (N4100040) or a water bath (B0080171), is required, but not included.

The pre-calibrated Xenon Pulse Lamp with Silencer combines a power-selectable Xenon Pulse Lamp, bracket, and silencer into one unit, enabling easy installation by the customer. This lamp is compatible with the FL 6500 spectrometers.

The External Emission Filter has a set frequency of 665 nm. It is a round filter, 3 mm thick with a diameter of 12.5 mm. This filter is compatible with the FL 6500 and FL 8500 instruments

The Special Optical Glass Macro Cell with a PTFE Stopper is used in Fluorimetry. It has the following specifications:

• Path Length: 10 mm x 10 mm
• Outside Dimension: 46 mm x 12.5 mm x 12.5 mm
• Inside Width: 10 mm
• Base Thickness: 1.25 mm
• Cell Volume: 3.5 mL
• Windows: 4
• Quantity: 2

Special Optical cells are identified by a green PerkinElmer logo.

The Injection Port Kit includes a 100 µL syringe and is an optional accessory for the Biokinetics Accessory, which is compatible with the LS 45/50/50B/55 fluorescence spectrometers. With this part number, the injection port can be purchased separately.

The Quartz SUPRASIL^® Cell with Macro Inlet/Outlet Tubes on Top is a Fluorescence Flow-Through Cell. It has the following specifications:

• Path Length: 10 mm x 6.5 mm
• Outside Dimension: 45 mm x 12.5 mm x 12.5 mm
• Cell Volume: 750 µL
• Center Height: 15 mm
• Windows: 3
• Quantity: 1

Quartz SUPRASIL^® cells are identified by a blue PerkinElmer logo.

The Quartz SUPRASIL^® Micro Cell with a PTFE Lid is used in Fluorimetry. It has the following specifications:

• Path Length: 10 mm x 2 mm
• Outside Dimension: 45 mm x 12.5 mm x 12.5 mm
• Inside Width: 2 mm
• Base Thickness: 1.25 mm
• Cell Volume: 700 µL
• Windows: 4

Quartz SUPRASIL^® cells are identified by a blue PerkinElmer logo.

The External Emission Filter has a set frequency of 610 nm. It is a round filter, 3 mm thick with a diameter of 12.5 mm. This filter is compatible with the FL 6500 and FL 8500 instruments.

The Fluorescence standards assist with the day-to-day checks on reproducibility and wavelength calibrations of fluoroscopy spectrometers.

Fluorescence reference standards measure for signal to noise and spectrum corrections for the FL 6500 and FL 8500 spectrophotometers.

The Quartz SUPRASIL^® Micro Cell without a Lid is used in Fluorimetry. It has the following specifications:

• Path Length: 5 mm x 5 mm
• Outside Dimension: 33.5 mm x 7.5 mm x 7.5 mm
• Inside Width: 5 mm
• Base Thickness: 1.25 mm
• Cell Volume: 600 µL
• Windows: 5
• Quantity: 2

Quartz SUPRASIL^® cells are identified by a blue PerkinElmer logo.

The Continuous Wave Module with Upper Bracket and Mirror contains a 150 W Xenon Continuous Wave lamp, a bracket, and a reflection mirror. It comes from the factory as one pre-calibrated unit, enabling easy installation by the customer. This lamp is compatible with the FL 8500 spectrometer.

Please note, this lamp should only be ordered if the mirror has been broken, scratched or contaminated.

The External Emission Filter has a set frequency of 590 nm. It is a round filter, 3 mm thick with a diameter of 12.5 mm. This filter is compatible with the FL 6500 and FL 8500 instruments.

The Quartz SUPRASIL^® Micro Cell with a PTFE Stopper (NS 5) is used in Fluorimetry. It has the following specifications:

• Path Length: 5 mm x 5 mm
• Outside Dimension: 46 mm x 7.5 mm x 7.5 mm
• Inside Width: 5 mm
• Base Thickness: 1.25 mm
• Cell Volume: 850 µL
• Windows: 5
• Quantity: 2

Quartz SUPRASIL^® cells are identified by a blue PerkinElmer logo.

The Quartz SUPRASIL^® Macro Cell with a PTFE Lid is used in Fluorimetry. It has the following specifications:

• Path Length: 10 mm x 10 mm
• Outside Dimension: 45 mm x 12.5 mm x 12.5 mm
• Inside Width: 10 mm
• Base Thickness: 1.25 mm
• Cell Volume: 3.5 mL
• Windows: 4
• Quantity: 2

Quartz SUPRASIL^® cells are identified by a blue PerkinElmer logo.

The Quartz SUPRASIL^® Macro Cell with a PTFE Stopper is used in Fluorimetry. It has the following specifications:

• Path Length: 10 mm x 10 mm
• Outside Dimension: 46 mm x 12.5 mm x 12.5 mm
• Inside Width: 10 mm
• Base Thickness: 1.25 mm
• Cell Volume: 3.5 mL
• Windows: 4
• Quantity: 2

Quartz SUPRASIL^® cells are identified by a blue PerkinElmer logo.