1-25 of 69 Products & Services
The Gateway™ Controller for the ATR Trough Top Plate is a dedicated temperature controller for the ATR Trough ZnSe Top Plate (L1272331). This unit comes with a main power cable (UK) and an instruction manual.
The Gateway HATR Trough Top Plate is a horizontal trough top plate with a dedicated temperature controller (220 V UK). It has a removable zinc selenide (ZnSe) crystal. This plate can be heated to a maxium of 200°C and is compatible with Spectrum Two spectrometers and ATR accessories.
The GladiATR Ge Crystal Plate is an optional configuration for the Gladiator ATR accessory. This top plate is made of stainless steel with a germanium (Ge) performance crystal.
This PerkinElmer ATR Top Plate has a diamond crystal and can be heated up to 130°C. It requires the USB Temperature Controller (L1272317/L1272318/L1272319).
The Top Plate Cover for Volatile Samples reduces the amount of evaporation that highly-volatile liquid samples can sustain on the surface of ATR top plates.
The MIRacle™ ATR Ge Crystal Plate is an optional configuration for the Miracle ATR Accessory. This top plate is made of stainless steel with a germanium performance crystal. It is ideal for temperature-controlled general purpose ATR analysis of carbon-filled or rubber materials. It is a resistively heated plate and requires a temperature control module. This plate can be heated to a maxium of 130°C. An accessory baseplate is required.
The Flat Tip for the High Pressure Clamp is a flat-tipped cone and is ideal for analyzing thin films, fibers, small particles, rubber samples and other elastic polymers, as well as powders.
The Ge Top Plate is an optional configuration for the Quest ATR Accessory. It is made of hardened stainless steel, has an anti-reflective coated germanium crystal sealed in indium, and a transmission range of 5,550 cm-1 - 450 cm-1. Baseplate included.
The Multiple Reflection HATR Trough Plate with Heater is an optional configuration for the MIRacle™ ATR accessory. This trough plate has a zinc selenide crystal and temperature control module. It can be heated up to 60°C. The temperature control module has a touch-panel interface, a USB port and comes ready to use with PIKE TempPRO software. This software offers a graphical user interface for temperature control and kinetics measurements.
The MIRacle™ HATR ZnSe Top Plate is a single reflection, horizontal ATR plate. It is an optional configuration for the MIRacle Single Reflection ATR Accessory. This top plate has a zinc selenide (ZnSe) crystal which is best suited for general purpose ATR applications.
This Miracle ATR Top Plate is a composite of diamond and zinc selenide crystals. This plate is ideal for the analysis of hard samples, acids, and alkalides.
This Value HATR Flat Top Plate is a stainless steel plate featuring an AMTIR (arsenic/selenium/germanium) crystal. It can be used with the PerkinElmer Value HATR accessories that are compatible with the Spectrum Two and Spectrum 3/Frontier spectrometers.
The Gateway ATR Flow-Through Top Plate has a zinc selenide (ZnSe) crystal set at a 45° angle, a volume of 550 µL, and a sample flow rate of up to 60 p.s.i. This top plate is compatible with Spectrum Two and Spectrum 3/Frontier spectrometers.
The Quest ATR Ge Top Plate is made of hardened stainless steel, has an anti-reflective coated germanium (Ge) crystal sealed in indium, a transmission range of 7,800 cm-1 - 400 cm-1, and a low refractive index of 2.40 at 1000 cm-1 .
This plate typically ships with the Quest ATR, but with this part number, it can be ordered separately, as a replacement or spare plate.
This Value HATR Flat Top Plate is a stainless steel plate featuring a thallium bromide (KRS-5) crystal. It can be used with the PerkinElmer Value HATR accessories that are compatible with the Spectrum Two and Spectrum 3/Frontier spectrometers.
The Concave Tip for the High Pressure Clamp is designed to work with granules, large beads, and polymer pellets. The tip features a concave surface, which prevents the sample from escaping from underneath the clamp. It also maintains the position of spherical samples in the center of the crystal.
The concave tip should not be when evaluating powdered samples.
The GladiATR Heated ATR Diamond plate is optional top plate configuration for the GladiATR Vision™ ATR Accessory. It can achieve a maximum temperature of 210 °C with either a digital or PC programmable temperature controller. These controllers are sold separately.
The Golden Gate™ ATR is a high performance single reflection monolithic diamond ATR. It features a Type IIIA diamond ATR element metal-bonded into a tungsten carbide mount to provide outstanding durability and exceptional chemical resistance. It ships standard with a bridge, clamp, and anvil assembly which has a maximum sample load capability of 72.5 kg.